Fractional CO2 Laser Acne Clear Stretch Mark and Scar Removal Laser Vaginal Rejuvenation CO2 Laser Fractional

Product Description

Product Description

 

The laser is used to make an average of 120-1200μm in diameter micropores on the skin, which then causes a series of skin biochemical reactions.Therefore, these pores are closed within 1 day to achieve the effect of firming and rejuvenating the skin and removing wrinkles.The dot-matrix laser is a mode of vibrating mirror scanning. The dot-matrix laser is equipped with a special image generator (CPG), and the image The generator changes the light emission mode. The dot matrix laser can emit a focal spot of 50μm-80μm through a high-focus lens.And scan these focal spots into up to 6 patterns (circle, square, rectangle, rhombus, triangle, line), divided intoDon't apply to different parts and different skin types.

1. The privacy is effectively tightened, and the effect lasts for a long time, due to the principle of CO2 laser stimulation of blood vessel regeneration. It can increase blood flow, activate cell function, change PH value, and achieve long-term tightening. 2. Painless, safe, short time, simple and quick to use, the whole process can be completed in only 10-15 minutes, with high customer acceptance, it can - change the problem in all directions and restore it to a young state.

1) After selecting the power mode, use the UP and DOWN buttons at the bottom of the screen to set the power. Setting range: 0.5W ~ 40W point energy PE is the energy size of each point 2) After selecting the continuous (depth) mode, use the UP and DOWN buttons at the bottom of the screen to set the point dwell time. Setting range: 0.1ms ~ 10ms 3) After selecting the repeat (speed) mode, use the UP and DOWN keys at the bottom of the screen to set the point interval time. Setting range: 1ms ~ 5000ms 4) After selecting the distance (density) mode, use the UP and DOWN keys at the bottom of the screen to set the distance between the point and the point. Setting range: 0.1mm ~ 2.6mm, point coverage PE, is the percentage of point coverage. 5) After selecting the shape (graphic) mode, set the emission form. (Change - the shape each time you press it) / Launch shape: straight line, Square, rectangle, triangle, regular hexagon, circle and ellipse 6) Using the left side of the screen, select the up, down, left, and right keys or the zoom in and out keys to adjust the size of the graph. Setting range: 2.0mm ~20mm 7) After selecting the scan (scanning mode) mode, set the emission mode (change the mode every time you press it), there are 3 types in total. Launch mode: random play, play in sequence based on one side, play based on the maximum distance between two points 8) Use the save (save) key to save the set value. First save the just set value in the designated number key. For example, press the number 1 in the set value, and then press When you save (save) key, when you press the number 1 key in the future, the stored setting value will be automatically input
 

Detailed Photos

 

Packaging & Shipping